Interactive Technology in Healthcare Education

Healthcare professionals are under pressure to remember, utilize and absorb vast amounts of new or changing information in increasing volume. This surge has led to new and improved computer-based tools for many healthcare activities and to an explosion in the marketplace of tools used in instruction and education of healthcare workers. This article explains the use of interactive technology in healthcare and how this benefits instruction and education of healthcare professionals.

Digital systems that capture images from documents, 35-mm slides, physical samples or specimens, or virtually anything that the camera lens can see, is found in interactive technology. In healthcare, transmitting these images to computers with simple devices or software that will allow the display and integration of educational material into the training environment is easily accommodated.

The method for delivering these images or documents, usually via PowerPoint presentations, photography, videotape or audio presentations can turn a standard Windows PC into a dynamic, interactive, teaching tool. Depending on the type of training environment needed, interactive presentations can be found in the use of liquid crystal displays, large plasma displays, rear projection systems or even whiteboards. Educators can now tailor their courses to their audience’s expectations and needs using any number of these presentation forms.

Effectiveness of interactive learning systems is largely dependent upon the type or form of delivery used in combination with software that is easily used by both novice and expert users. Smaller systems will use a pen or stylus vs. a computer and a mouse where larger systems may use elaborate videoconferencing systems where many participants can be in the virtual classroom at the same time. Many healthcare organizations already utilize small and large types of communication systems routinely in the delivery of quality, high-tech healthcare to patients and their community. Adapting this equipment or having it serve dual purposes is an easy and cost-effective transition.

The era of the blackboards and chalk dust is now a memory for most of us. Interactive technology tools permit the educator to draw on, write on, and annotate data right on the screen as part of their dynamic presentation. In addition, the educator can now annotate their presentation and then save, print and even distribute by email, the contents of the class session to all participants.

The mobility that interactive technology gives the educator in the virtual classroom lends itself to unlimited types of uses and methods for delivery of high quality, interactive, sessions. Participants, too, benefit from easy access to the sessions, improved and more accurate note-taking that can be used later for study and reference. This all leads to greater retention of the learning objectives and enhanced or improved application in the field once the participant returns to the office or department.

Healthcare professionals should look for educators and learning systems that combine ergonomics with interactive technologies that integrate use the user of free text, annotation, images and video clips with the traditional printed materials. Transitions between screens or programs, linking to the Internet and class sessions, downloading or printing of the course materials and saving of files or information for future classes or reference use should be easy and simple to use. The presentation and delivery of the educational material should be efficient and easy to use and tailored to use by both healthcare professionals that have varying levels of technological skills.

Regardless of whether healthcare workers are new to the workplace or seasoned professionals, the learning systems used should assist them with learning new skills, procedures, diagnostic techniques and terminology. Communication between healthcare workers in both local and distant communities is on the rise and the use of interactive technology enables the participants to collaborate and share critical data and information.

Interactive technology can also benefit the bottom line and reduce costs formerly associated with travel or staffing and resources to send workers to local, regional or national meetings. Interactive presentations and systems can also attract and hold the participants interest and attention, enhancing their learning and retention gained from the course(s).

It is no wonder, then, that interactive technology has gained such a strong and prominent position in the education of healthcare workers. Healthcare workers looking for either online, distance or local training should evaluate the presentation and delivery systems used in order to maximize their learning experience.

PUBLISHING RIGHTS:

You have permission to publish this article electronically, in print, in your e-book or on your website, free of charge, as long as the author’s information and web link are included at the bottom of the article and the article is not changed, modified or altered in any way. The web link should be active when the article is reprinted on a web site or in an email. The author would appreciate an email indicating you wish to post this article to a website, and the link to where it is posted.

Copyright 2005, M. A. Webb. All Rights Reserved

Biker Lifestyle – Building the Perfect Custom Harley Chopper

If you ride to live, then you know what it means to own a custom Harley chopper, and I am not talking about some add-on chrome bike either; Anyone with some cash can drop by your local Harley Davidson dealer and ride away on a new Road King, or other of their other factory models.

A real custom Harley chopper is a one of kind custom built masterpiece that is created from the ground up, a 100% all original work of American beauty that reflects the personality and lifestyle of the proud owner. Hard core bikers know what I am talking about; the painstakingly hard work of creating and shaping a one of a kind statement of riding to live, and living to ride, wrapped around the perfect custom Harley chopper.

Building the perfect Harley doesn’t happen over night either, everything must be the perfect balance of frame, forks, the right rake and extension, rolling on tires and wheels that support the whole design. Every thing matters when building the perfect custom Harley, and if you are truly hardcore, then to complete the full extension of machine to man could mean 100% custom parts, engine, tank, and chrome. Nothing but the best will do.

So what does it take to build the perfect custom Harley motorcycle? First off it takes a boatload of cash, then you gonna need to find the right craftsman to hand all that cash to, and then brother you need some patients; you gonna have to sit down and talk with your craftsman, and help him understand how you are, what is important to you, so he can put pen to paper to form up some rough ideas. These ideas will be shaped and tweaked and considered until your Harley craftsman has the design that is truly you, and no one else.

Every nut, bolt, piece of molding, the right handlebars, and grips, absolutely everything will be well thought out, and nothing will be left to chance, or just thrown in. The perfect ride height that flows with a saddle that is made to fit your backsides contour, and all of the remaining pieces that are build around the heart of your custom chopper, the engine and   transmission .

With you custom Harley almost complete, there will hours and hours of assembling and disassembling, fine tuning, tweaking, and testing until the final phase will be applying the richest paint job and graphics that turn thousands of dollars of hard earned cash and countless hours of laborious love, sweat, busted knuckles, and blood into the work of beauty that is your custom Harley chopper.

OK so where do you find this custom chopper craftsman? Well I am sure you already know the answer, and this isn’t an overnight decision either, we have read every biker rag, went to all of the top bike shows, studied every custom bike we come across, and after we have researched all of our options, we pick up the phone or ride out to our craftsman and after a serious conversation or two we close the deal by shaking hands, signing some paperwork, and dropping that that big fat wad of cash we have been saving for who knows how long.

Those of you who have lived that dream of building and owning the perfect custom chopper know what I am talking about. Those of you still working on the dream will very soon know as well. The love of our lifestyle is but a reflection of how we live, carry ourselves and the bike we ride, the rest of this love is in our hearts!

SUVs Meet High End Luxury (And Are Kind to Your Wallet)

Sport Utility Vehicles (or SUVs) have become increasingly popular over the last several years, with more and more manufacturers adding their versions to the market. With their ability to function well as both on and off-road vehicles, large storage space, ability to fit several passengers as well as towing abilities, SUVs serve as a very practical solution for much of the automobile buying market. Quality SUVs also handle well, feeling much more like driving a car than a massive truck with many of the same benefits.

While SUVs have always held a certain authority and status due to their size, they are often placed in a separate, “practical” category from the truly high end luxury cars. Fortunately, a few upper-echelon manufacturers have released their own versions of the SUV, blurring the lines between practicality, performance, style, and luxury interior. These include:

– BMW X5

– Lexus GX

– Mercedes G and M classes

– Audi Q7

– Porsche Cayenne.

The BMW X5 Series is a mid-size SUV in the market since 1999. Features include all wheel drive, and V8 engines with gasoline inline. E53 and E70 are the two generations of the model. The E53 model has many features of Landrover. The E70 model is more of a Sports Activity Vehicle. Other luxuries such as high pressure headlight washers, heated front seats, heated steering wheel, leather seats, automatic climate control, automatic light control, and sun roof add to the comfort and luxury of the vehicle.

The Lexus GX can seat up to 8 passengers. It has many great features including a welded steel body, center locking permanent 4 wheel drive, built in mudguards, illuminated running boards, electronic 5-speed automatic   transmission , and the innovative, unparalleled luxury interior and amenities customary in all Lexus models. Models from 2004 and up feature additional safety modifications like tire pressure monitoring, roll-sensing, side curtain airbags, and a Dynamic Suspension System. Like most Lexus models, the GX has won several awards: 4 wheeler of the year, highest ranked luxury SUV for quality, and best resale value from sources like 4×4 Magazine, J.D Power and Associates, and Kelley Blue Book.

The Mercedes G-Class is a four-wheel drive sport utility vehicle launched in 1979, originally created for military use with a jeep-like look. The three generations of the vehicle are W460, W461, and W463, and it is hailed for its long lifespan and durability as well as off-road performance. The interior of the car is made of wood or leather. The automatic  transmission , power steering, airbag, central locking, air conditioning, engine pre-heater, electric windows, and heated seats really add to the sense of luxury.

The M-Class by Mercedes is a mid-size SUV introduced in the market in 1997, featuring stability control which helps in bringing the vehicle to a halt in case of emergency. Excellent features such as seven speed automatic  transmission , Active Curve illuminating Bi-Xenon headlights, 4-valve engines, and air suspension which can be adjusted are major attractions of the vehicle. The cars also use BlueTec Diesel engine for controlling diesel gas emissions. New front headlights, exterior mirrors, redesigned front grille, an improved interior, and front and rear bumpers add to the beauty of the car. The M class won the “Truck of the Year” in 1998 awarded by Motor Trend magazine. Also it was named “Best New Sports Utility Vehicle” in the year 2006 during Canadian Car of the Year Awards.

The Porsche Cayenne is a five-seat mid size luxury sports utility vehicle launched in 2002 with two generations. The engines in the models introduced from 2008 have direct injection technology. The main features of the car are height adjustable off-road suspension, slanted rear window, remodeled dashboard, taillights near the tailgate, lighter weight due to the usage of aluminum, and fuel efficiency. Owners love the climate control, cruise control, leather upholstery, heated front seats, power sunroof, radio control, and leather-wrapped steering wheel. Features such as a rear view camera, memory system, navigation system, sound system, climate control, and CD changer make the car an excellent marriage of luxury and SUV performance.

Price of course is always an issue, but these world class SUVs can be found online at surprisingly good deals. At the time of this writing, HighEndAutoAuctions.com has multiple BMW X5s under $15,000, several Cayennes under $20,000, and several steals on each of the other models. No matter which source you choose to purchase from, these models are sure to satisfy both your practical needs and luxury desires.

Something Between The GS 300 And GS 400

Dissatisfied with the old GS 300, Lexus decided to start over, almost from scratch. The result is not one but two new cars: the GS 300, powered by an in-line six-cylinder engine, and the V-8 equipped gs 400. Both are mid-sized 4-door sedans whose declared mission is to upset the BMW-Mercedes applecart.

Inside

The inviting, easily accessible cabin has very comfortable seats upholstered in leather and equipped with power lumbar support. The driving position is very good, and the tilt- telescopic steering wheel retracts when the ignition key is removed to facilitate entry and exit. The driver’s-side seating memory (seat, mirrors and steering-column) can only be activated with the   transmission  in Park.

The rear bench can comfortably accommodate two adults, as long as they are not too tall — head room is tight.

The trunk is bigger than before but still just average in size, with a dual-level floor that adds nothing to practicality. The rear seat back does not fold and does not have a port to accommodate long objects.

Convenience and safety

The GS is impeccably fitted and finished but can get a bit noisy on rough pavement. Of the many storage compartments, the glove compartment is especially impressive; it houses a six-CD disc changer as well as a pollen filter.

Everything in the GS bears the stamp of quality. The various controls have a solid feel, and all are ergonomically perfect. Our one small complaint concerns the click of the turn signals, which is practically inaudible.

Comfort and convenience features include an excellent dual-zone climate system with separate driver- and passenger-side controls, and a powerful audio system.

The analog dashboard information is projected into deep dials. The projection is clear and easy to read, never tiring for the eyes.

Safety features include dual front and side air bags, anti-lock brakes, traction control, stability control, and lockable head restraints. Xenon headlamps turn night into day; other headlamps pale in comparison. The view to the rear is limited by the rear head restraints, spoiler and small window.

Engine and  transmission 

The silky-smooth engine is lively and progressive through most of the rev range, thanks to Lexus’s VVT-i (variable valve timing with intelligence) system. Acceleration, both standing and passing, is adequate but timid compared to the gs 400.

The six-cylinder engine is melodious, if not spirited. More work is required to make the accelerator more progressive and communicative, and to rid it of its artificial fee.

The  transmission  is normally very smooth, but it can be slow to downshift in quick stop-and-go driving or when slowing almost to a stop, then re-accelerating. Combined with the jerky accelerator, this can generate abrupt, annoying shifts, inconsistent with Lexus’s “Relentless pursuit of perfection”.

Roadability

The GS 300 offers a very smooth ride, occasionally firm, never uncomfortable and perfectly compatible with its sport sedan status. The 300 has a very firm grip, a solid feel, and is agile and easy to handle on winding roads. When it detects a skid, the VSC (vehicle skid control) system applies the brakes selectively at one or more wheels while reducing engine power. Despite the feeling of safety, drivers should ignore the temptation to override the laws of physics.

Quick and precise, steering is a bit heavy at slow speed and should provide more road feedback. The brake pedal requires a firm foot to obtain full braking power.

The GS 300 is impeccably built underneath, an examination at the CAA-Quebec inspection showed.

Conclusion

Lexus classes its GS vehicles as luxury sport sedans. While the six-cylinder engine may not fully merit the “sport” label, the GS 300 is nonetheless a finely balanced car offering inspiring handling. Careful construction, quality materials and generous standard equipment are an added appeal in a vehicle built by a company recognized for the reliability of its products.

Best Cold Sore Treatment – What is A Successful Cold Sore Cure

In this article we will look at a few different types of medicinal remedies that are available and are considered to be the best cold sore treatment that is available today to achieve a cold sore cure.

1. Viroxyn

This is a new approach in helping to treat herpes and does not rely on the patient taking the medicine internally. It has been designed to specifically attack and disrupt the lipid coat of virus and is best described as being a germicide rather than the normal anti-viral treatment. Many say this is the top approach on the market.

As it is a virucide you apply it directly to the lesion and this will then kill the virus. This type of treatment works faster than many of the other types of drugs available which have to work their way through your stomach into the bloodstream and which are then able to deal with the sores and will only interefere with the viruses reproduction which has caused the eruptions in the first place. This is why some call it an effective remedy.

Unlike the other treatments that are available which will interrupt the genetic code of herpes and eventually stop the virus from growing, Viroxyn strips the lipid coating off the virus and then kills it when it comes into contact with an affected area.

2. Zovirax or Acyclovir

This is taken as an episodic treatment and can reduce the severity of the outbreak, as well as shorten its duration and also shorten the time during which the herpes virus is detected on the skin’s surface in a similar way to Viroxyn.

Because it is an episodic treatment it should be taken 5 times a day and can also be used as a suppressive treatment which will help to reduce the number of cold sore outbreaks a person has. If you wish to use it as a suppressive treatment you will need to take 2 tablets 3 or 4 times a day but it is best to speak to your doctor to get the specific dosage in order to treat the cold sores correctly. This medication has it’s own defenders as the best fever blister treatment on the market.

However with Zovirax there are a couple of common side effects which you may suffer from and these are nausea and diarrhea. When you consider a cold sore cure, you must keep in mind the side effects in making an evaluation.

We have provided details on a couple of the best cold sore treatments that available, but it is up to you to research both natural and prescription treatments and use a plan that you feel comfortable with in your search for a herpes cure.

How Does Telepathy Work? And Can Anyone Use Telepathy?

The question most frequently asked is how does telepathy work. Well firstly telepathy is direct communication which transpires between two minds. Telepathy can also be transmitted through feelings such as “I have a gut feeling” which is very common in all people and animals. Telepathy can also be transmitted via emotions and images which are practiced by many.

One does not need to have a degree of some sort in order to practice telepathy as telepathy is an inbred natural phenomenon we all have and some call it “sixth sense”. Many people also term telepathy as coincidence for instance the phone rings and on the other end of the line is the person you were just thinking about – that is telepathy   transmission  of thought.

There are many classes available that offer courses whereby your mind is trained to transmit words and phrases. The very best way to reopen this 6th sense is through meditation which allows one to calm the mind and when the mind is calm telepathy becomes second nature. And with training one can then intentionally communicate with another person.

Quantum physics states clearly that the human mind interacts with the universe as well as interacts in and around many other universes. The human is a part of not “apart” from the universe and all that is within the universe which is why we are able to telepathically communicate with all other living matter or energy.

Telepathy is a form of energy as we are all energy beings. Here is a simple example when you make a phone call you are passing a message directly to another person via a transmitting receiver and telepathy is no different accept you don’t have a transmitter or receiver in your hand you are transmitting via the brain in the form of energy.

In other words when you send a telepathic message you are extending your energy to the other person and you then drop off that energy with the intended person and immediately you will retract your energy. How does telepathy work it is simple and straight forward method of sending and receiving.

The Transformative Power of Sacred Art-Making

When I began teaching Western women the sacred art of Tibetan appliqué in 2008, I thought I was just teaching stitching technique. My students quickly set me straight. It turns out I had seriously underestimated the power of tradition and   transmission . Through teaching, I discovered the transformative effect of the sacred textile art I’d been making for 20 years.

I had lived in northern India for nine years and learned to make silk thangkas in apprenticeship to Tibetan master craftsmen.

A thangka is rollable wall hanging, a scroll, depicting a sacred image or spiritual teacher. Most thangkas are painted on canvas and framed in brocade, but I studied a rarer type of thangka in which the images are built from hundreds of pieces of silk, outlined in hand-wrapped horsehair, assembled in an intricate patchwork.

Six days a week for four years, I sat alongside young Tibetans in a sewing workshop just outside the Dalai Lama’s temple. The environment was infused with dharma. Sounds of teaching and practice echoed from every window and courtyard. I attended Buddhist philosophy classes in the morning with learned Tibetan scholars (geshe) and then trudged up the steep hill to the workshop where I stitched thangkas all afternoon.

I had absorbed the dharma this community breathed, and it came out through my fingers into the thangkas I stitched. But I was no dharma teacher, and only an inconsistent meditator. I told prospective students that I would teach them stitching techniques, made sacred only by association. They should not expect spiritual illumination from me. They must seek that elsewhere, I thought.

Little did I know, each line and stitch of this artwork carries the light of the buddhas and of generations of artists and practitioners. You can’t escape the deeper lessons woven into the fabric of this lineage.

I was living in Italy, married and making thangkas on commission, when an American woman in France contacted me and sparked the creation of the Stitching Buddhas Virtual Apprentice Program. Louise had returned to France after many years of following her husband’s job from country to country while raising young children. Now, she was seeking an occupation, something meaningful to do with her energies.

Louise had been trained as a costume designer and was a practicing Buddhist. When she saw her first silk thangka on the internet, it struck her as a natural coupling of her creative background with her spiritual practice. I had the same feeling sixteen years earlier when I walked into a Tibetan appliqué studio in India. Could I now offer this gift to others?

Working with needle and thread re-awakens our tactile intelligence. Eyes and ears are not our only receptors for learning. The rational mind is not our only mode of understanding. And the voice is surely not our only instrument for communicating. We perceive, learn, and communicate through our fingers as well. But in the 21st century, our range of manual engagement has been reduced to tapping smooth keys and swiping touch-screens.

People who knit or quilt or work on a potter’s wheel have experienced the mindful quality that can arise in slow, deliberate movement and tactile sensation. Doing something by hand slows down the busyness of life – if only momentarily.

Not only that, but the thread becomes a metaphor for your life. You see how things get tangled when you don’t pay attention. You see where perfectionism trips you up, where you are afraid to move forward and how, sometimes, the more effort you exert the worse things get. Sometimes gentleness and a relaxed approach are needed. These patterns become evident in the stitching, and awareness filters into other activities.

The Tibetan appliqué tradition flows from an ancient spiritual lineage of artists, teachers and practitioners who have created and used its images in their practice. When we stitch, we receive their  transmission  through our fingers.

People often ask if I meditate while I stitch. I say this stitching IS meditation.

Literally, the Tibetan word for meditation (gom) means to familiarize. Through meditation, we familiarize ourselves with desirable mind states – expansive, loving, generous, imperturbable mind states – in an effort to make them habitual.

When we stitch a thangka or even a lotus flower, we are in the presence of enlightenment. We familiarize ourselves with enlightened beings, and therefore with the highest qualities of our own nature. The images in our hands symbolize the clearest, highest, best parts of ourselves and of humanity. Stitch by stitch, we allow these qualities to fill us.

Most of my students, the Stitching Buddhas, are women in the 50s and 60s. They are well educated. Many have worked in healing professions such as nursing, medicine, social work, and psychotherapy. Many are mothers of grown children. They come to the practice with an awareness of limited time. Some face diminishing eyesight or challenges to their manual dexterity. Some have no sewing experience at all. They’re not preparing for a career in thangka-making. They are seeking to live their life meaningfully and happily, and to leave something beautiful in their wake.

Buddhism encourages us to recognize our good fortune and to use this precious human life well. Human rebirth is rare and hard to come by. With gratitude in her heart, each woman-buddha stitches her response to Mary Oliver’s sumptuous question: “Tell me, what is it you plan to do with your one wild and precious life?”

Bloodborne Pathogens – Preventing Disease Transmission

Imagine receiving a call that an employee has been injured from a fall down a flight of steps at your facility. The caller tells you that 911 has been called and some of your fellow employees are tending to the victim. As a supervisor, you decide to respond to the scene.

You arrive just as firefighters and paramedics take over caring for the victim. These rescuers do their job well – the victim is stabilized, wrapped up for transport to the hospital and gently placed on the stretcher.

As you watch, you can’t help but notice that the firefighters and paramedics are wearing medical gloves and goggles. As EMS (emergency medical services) personnel leave the area, you approach the employees who helped to thank them for their efforts. Almost immediately you become aware of a very frightening sight – both of the rescuers have fairly large spots of blood on their clothing and, even more upsetting, both are using paper towels to wipe the blood off of their hands. It is obvious that these employees did nothing to protect themselves from disease transmission and both have been contaminated with the victim’s blood.

Wearing PPE (personal protective equipment) is an important part of professional rescuers’ equipment. They know that protecting themselves from bloodborne pathogens is, in some ways, just as important as caring for the victim. But what about your people – do they know the risks associated with not wearing protective equipment?

If your company provides first aid kits for employee use or if your employees are required to respond to a medical emergency, they should have access to protective equipment and receive training on bloodborne pathogens.

ASSESS YOUR OPERATION’S RISK FOR EXPOSURE – I was recently asked to evaluate exposure risks for an association of tow truck operators, body shop technicians and auto mechanics. These people lacked training on bloodborne pathogens.

Tow truck operators wear thick, leather work gloves and routinely pick up bloodstained windshields or wrap contaminated airbags around steering columns. Body shop technicians pull contaminated seats from wrecked vehicles and then sit on them during their breaks or at lunchtime. Mechanics have a tendency to cut their knuckles or foreheads while repairing vehicles. They also share tools with fellow employees – tools that are contaminated with blood from their last injury.

I know you’re not in the automobile repair business. The examples above are intended to get you thinking about your own operation’s risks of exposure to potentially dangerous body fluids. Do you have a first responder team or people assigned to respond to an emergency? Are first aid kits available to employees? Do employees share equipment or tools that could become contaminated? Who is responsible for cleaning up body fluids after an accident or injury?

Without proper communication policies and training in preventing disease transmission, your employees could find themselves exposed to the same dangers paramedics and firefighters face while coming to their aid.

So what can you do to reduce the risk of exposure? Let’s start with defining bloodborne pathogens and the impact that exposure to them can have on employees and employers.

CONTAMINATION PREVENTION GUIDELINES – Bloodborne pathogens are pathogenic microorganisms that are transmitted via human blood and cause disease in humans. They include – but are not limited to – hepatitis B and human immunodeficiency virus (HIV).

I know for many people (myself included) words like microorganisms, immunodeficiency and pathogens bring back thoughts of high school and health classes – the last places in the world most of us want to revisit. So before we go any further, let me put it in my terms: There’s a lot of junk out there that can make us very sick, or even kill us if we become contaminated.

We need to constantly be on guard and be very careful so that we don’t become contaminated. I’ve been teaching CPR and first aid training for over 25 years, and I’m often asked if I would do rescue breathing without a barrier on someone I do not know. I respond without hesitation: If I found someone unresponsive and not breathing, I would immediately call for help and begin chest compressions on the victim, but there is no way I would do mouth-to-mouth on the individual without a breathing barrier.

Emergency responders know the risks associated with coming in contact with bloodborne pathogens, and they know how to protect themselves. Unfortunately, far too many people in the workplace or good Samaritans on the street do little, if anything, to take the necessary precautions. Too often they realize they’ve been exposed to body fluids after the emergency, when it’s too late to do anything about it.

EMPLOYEES – Here are a few simple rules to follow when faced with the possibility of exposure to bloodborne pathogens, or any body fluids for that matter. This information is presented as guidelines for both employees and employers. The American Heart Association calls it “Making a PACT, Know How to Act.”

PROTECT – Protect yourself from blood or blood-containing materials. This includes wearing protective equipment such as gloves and goggles and using a breathing barrier if you are performing CPR. Consider your options if you find yourself with no protective equipment.

ACT – If you find you have come into contact with another person’s blood or other body fluids, act quickly and safely. Wash the area immediately with hot, soapy water for up to a minute before rinsing. If your eyes have been contaminated, flush them with clean water for up to five minutes. If a flushing agent is not available at the scene, have someone get water for you. Firefighters or paramedics can assist you if they are still at the scene.

CLEAN – After an emergency, especially in the shop area or office, clean any areas contaminated with blood or body fluids. Wear protective equipment. Clean the area with a solution of one part Clorox and eight parts water. Completely flush the area and let the solution stand for at least three minutes. Be careful when wiping up the area, especially if you are dealing with broken glass or wood or metal splinters. Put all soiled items, including soiled cleaning materials, in a plastic bag and take it to the dumpster as soon as you are finished. If there is an injection device (such as a needle) involved, try to give it to the medics or firefighters before they leave; otherwise, get it in the dumpster and use extreme caution while doing so.

TELL – Report the incident immediately to your supervisor or human resources department. Ask for a dated copy of the report (even if it is only handwritten).

EMPLOYERS’ RESPONSIBILITIES – Employers have a responsibility to protect their employees from exposure to bloodborne pathogens. Here are the specifics of this responsibility.

PERSONAL PROTECTIVE EQUIPMENT – Any employee at risk of being exposed to bloodborne pathogens must be provided with the protective equipment necessary to keep them safe from exposure. This equipment includes gloves, goggles and, if required, breathing masks or barriers for CPR.

EDUCATION – Not all professions require bloodborne pathogen education and prevention training.

A call to OSHA (Occupational Safety & Health Administration) may or may not give you the answer you are looking for. It appears as though OSHA looks at a number of factors when determining whether an employer does or does not have to comply. For example, if you offer voluntary CPR/first aid training to your employees, they may not be required to take bloodborne pathogen training. If you have designated first aid responders within your organization, you probably fall under the training requirements.

Many of you know your employees’ occupational exposure risk. If you have personnel who are routinely or even occasionally exposed to blood or body fluids in the execution of their duties, you may want to consider offering protective equipment and training to these employees.

ENGINEERING CONTROLS – Engineering controls help to protect employees from bloodborne pathogen contamination and prevent the spread of pathogens in the workplace. Here’s an example of engineering controls: An employee using his leather work gloves realizes he has come in contact with body fluids and the gloves are contaminated. Two controls should be in place to protect the employee. First, knowing his exposure risk, the employer should have a spare set of gloves on hand so that the operator can complete his job. Second, the company should have a procedure for disposing of or cleaning the soiled gloves.

WORK PRACTICES – Setting standard practices for preventing disease transmission is a very important part of an employer’s responsibility in protecting employees.

In the case of the body shop previously mentioned, good work practices would include establishing a policy requiring workers to wrap plastic around seats pulled from a wrecked vehicle and prohibiting them from sitting on the seats, even with the plastic cover in place.

Providing employees with their own toolboxes is another good practice. If they share tools, have a policy in place for cleaning and decontaminating tools, especially after an accident or injury. Moreover, make sure employees know the importance of disposing of or cleaning contaminated personal protective equipment.

Finally, offer a course in bloodborne pathogen training. It is an excellent way to communicate the importance of preventing disease transmission and protecting your company from a huge liability/workers compensation claim.

HAVE A WRITTEN POLICY AND REPORTING PROCEDURES IN PLACE – As I previously mentioned, implement policies related to bloodborne pathogens at your operation. Start small, then expand on the policies as new issues surface. Communicate with your people. Make sure they know the reporting procedures and the importance of reporting any possible contamination.

OSHA has templates for creating your own company bloodborne pathogens policy and/or procedure. Simply download the forms, fill in the blanks with your company name, etc., print them out and you’re good to go. Additional information can be obtained by calling your regional OSHA office.

TRAINING, POLICIES ARE WORTHWHILE INVESTMENTS – I am a business of one, but if I did have employees, I can assure you – they would be trained on bloodborne pathogen risks and contamination prevention, and my company would have a policy in place. It’s the right thing to do for a business, its employees and the employer. And just imagine how good it would feel to know that your operation is in compliance should OSHA officials decide to visit.

Invest an hour for setting up your program, distribute the information to your employees and arrange for a 30-minute bloodborne pathogen education and prevention class. The investment is small, but the dividends to you and your employees will be huge.

The History of the Honda CD185 Motorcycle

The vintage Honda CD185 was first manufactured in 1978. Very few of these models were produced which makes finding parts a little difficult, but it is possible.

The stock engine was an air cooled 4 stroke SOHC twin which helped in both speed a mileage. The Honda CD185 comes packed with power, especially as a collectors item. The style of this bike is a roadster for both its ease of transportation and its high range of speed.

The transmission offers a 16 count front sprocket and a 36 count rear sprocket with a 112 count chain link. When you start your CD185 for the first time you will feel the 4 speed constant mesh every time you pull the throttle. This was a highly sophisticated machine for its time and it still has high value in performance.

The petrol capacity is 10.5 liters that will bring hours of riding before the next pit stop. This may be smaller than many current models but it still holds itself with the mileage the bike can get when maintained at 60mph on the motorway. When you have a choice to pick this motorcycle over others be sure to remember that this bike is a vintage and not to many were produced during its run.

When it comes to breaks there is both front and rear drums. The electric that will run through the motorcycle as you turn the key is 6 volts which is just enough to make your next ride a care free experience knowing that you won’t have to jump it before your next trip. The ignition is known as “points” and many review that it does its job fairly well. The Honda CD185 has many highlights that are just unseen even with today’s standards. But, that fact makes it clear that the Honda CD185 is a bike to keep your eyes peeled for.

The battery needed for Honda CD185 is a 6N12A-2D. The Honda CD175 have cables to operate the clutch and front brakes. It also has a manual cable operated choke. The Honda CD185 uses a 34 tooth rear sprocket and a 15 tooth front sprocket. The chain is a 428,112 link chain. Replacing the ignition switch can be a little tricky. Depending on the year of motorbike you need to check if it needs a 4 wire ignition switch or a 6 wire ignition switch. If you are looking the change the mirrors any 10mm thread mirrors would do the job. Lastly the spark plugs needed for the Honda CD185 are CR7HS and you will need two of these plugs.

Genital Wart Facts

Genital warts are a type of wart that are only found on your private parts of the body. The genital wart is one that will be easily recognized. Genital warts are also known as veneral warts and also as condylmata acuminata. Warts in this manner are caused by a skin infection, which is known as PHV infection. It is possible to have the HPV infection without having genital warts. Genital warts are often passed along during sexual intercourse, but not all those who have genital warts are going to know they are infected until the warts are bigger and a little more painful.

Warts are a virus, that can be passed by touching, sitting and skin to skin contact. The most common types of warts are seen on people’s hands and feet, which are a different form of a wart but are generally the same thing if you are wondering what genital warts really are.

Warts are associated with the tumors that form under and in the skin. The tumors are forms of the HPV infection, and will form warts as the body rids the infection from the body. If you have warts on the hand or on the feet, you are not going to spread this to your genitals. If you know someone who has genital warts, they are not going to give you warts on your hands and the same goes the other way around.

For the woman, if you have genital warts, they will appear on the inside and the outside of the vagina. If the woman has anal sex, the genital warts could appear an the anus, and the same is for the man. If a man is having anal sex with another, the genital warts could appear on the anus area as well.

The warts will appear in the same area, taking a long time to spread out. Sometimes the warts will disappear on their own, but only in rare cases often times the genital warts will spread becoming crusty and become large areas of warts over the private areas of a male or female. If you have genital warts, and someone performs oral sex, the genital warts can be transmitted to that person. Genital warts can be treated by a doctor, and with medications. If not treated, often times genital warts can become troublesome not only for the person suffering with them, but for people you love and want to share that special relationship with.

If you have sex with someone that you later finds out has genital warts, you most likely are going to end up with genital warts are well. It can take any where from one month to three months for genital warts to appear and become large enough for a person to notice them. Always protect yourself by avoiding having sex with anyone you don’t know or trust not to have genital warts.

You can find more info about genital warts on

http://www.all-about-genital-wart.com/